1
Placement
Place your decal on your garment and firmly press down. The name should be the correct way around.
2
Heat
Check your iron's heat range. Turn off the steam function and adjust the temperature to a setting that is between 160 and 200 degrees.
3
Temperature
If your iron does not reach 160 degrees the label will not adhere to the fabric. If you set the iron too hot this may melt the label. Please check your settings and temperatures carefully.
4
Application 1/2
Place a sheet of greaseproof paper over the top of the area. Iron firmly in bursts of 5 seconds, checking the label after each turn.
5
Application 2/2
Once fully adhered slowly remove the transfer tape. Place the silicone paper back over the decal and iron again for 5 seconds. Please wait 24 hours before washing your garment.
6
Two Layers
If your decal has 2 colours repeat this process for the second decal layer.
